2023 | 06 > Coupling with 1° angle adjustment and axial mounting to transmit torques from power drives to adapter tubes. > KKS 10 for welding to tube, KKS 14 for screw-mounting. > It is possible to remove the drive unit after the chain has been taken off. > The 2 rows of chain links permit small alignment errors of up to 1° between drive and adapter shaft. > Steel coupling, weldable, milled, weld hub with bore or collar for welding, or plug-in hub with bores for screw-mounting to adapter tube. > Axial mounting with circlip, except for shaft We 68. > Can be used for speeds of up to 30 rpm. Note: > Pay careful attention to permitted torque for the adapter tube. If necessary, use tube with larger wall thickness, e.g. 1“, DIN 2441 33.7 x 4.05 mm. KKS 10, KKS 14 // Chain coupling 1° angle adjustment KKS 10 KKS 10 KKS 14 KKS 14 LOCK BEWEGT // LOCK MOVES 10 KKS CHAPTER 05 – COUPLINGS
RkJQdWJsaXNoZXIy NTQ3ODU=