LOCK BEWEGT // LOCK MOVES 16 HZW CHAPTER 07 – MANUAL DRIVES HZW 60 Type Load [kN] Stroke [mm/n] Crank force [N] HZW 60.15 15 14,0 280 HZW 60.30 30 9,0 280 HZW 60.50 50 4,5 280 HZW 60.100 100 3,2 400 2023 | 06 > FIN 7355 compliant rack-and-pinion jacks designed for wall mounting. > They are suitable for positioning slides, conveyors, work tables, etc. > Operating temperature permanently -20 °C (-4 °F) to 60 °C (140 °F) (operating temperature static up to 90 °C/194 °F) With danger alert > The gear units are not self-locking. > The holding torque is achieved by the transmission and locking the crank system. > The application must be secured by a secondary method (e.g. staking) for protection in the event of failure of the holding force. > A connection to the supporting structure must be evaluated/designed by the customer. Direction of force of gear unit/winch > Due to asymmetrical gearing, the standard version may only be loaded in one direction (compression or tension). > The installation position of the winch must be observed during assembly. > A maximum of 5 % of the crank force is permitted against the direction of force. > Also available for compression and tension with symmetric toothing and pressure roller safety crank. > The pressure roller safety crank can also be mounted on a steel winch with asymmetrical toothing. > The advantage is that the crank is quiet and cannot come loose under vibration (e.g. container lid on a truck). > All cranks are galvanized without painting. HZW 60 // Rack and pinion wall jack DIN 7355 15–100 kN
RkJQdWJsaXNoZXIy NTQ3ODU=